View source for Intel 8∕16 LAN Adapter

{{Ethernet Infobox
 | Bus type = ISA
 | Bus width = 16-bit
 | Bus speed = 8 MHz
 | 8-bit ISA compatible = Yes
 | Manufacturer = Intel
 | Chipset = i82586 <!-- Maybe? -->
 | Compatible with = <!-- Not sure? [[Has compatibility::NE1000]], [[Has compatibility::NE2000]] -->
 | Connectors = [[Has connector::AUI]], [[Has connector::BNC]]
 | Is ROM socketed = Yes
 | ROM type = 32-pin JEDEC
 | Is ROM writable = Yes
 | Requires -5VDC = Unknown
 | Requires -12VDC = Unknown
 | Config = [[Config method::Software]]
 | Driver<!-- TODO -->
}}

The '''Intel 8∕16 LAN Adapter''' is a 10Mbps network card.

== Additional photos ==

<gallery mode="packed">
Image:Intel 8∕16 LAN Adapter underside.jpg|Underside
Image:Intel 8∕16 LAN Adapter-filmag.jpg|Alternate card (Fil-Mag)
</gallery>

== Boot ROM ==

This card's boot ROM socket appears to take a standard 32-pin flash chip, however at the time of writing this has not been tested.

The card's DOS drivers come with a configuration program (<tt>SOFTSET.EXE</tt>) that can be used to enable the ROM socket (it is disabled by default) and set the base address, as well as adjust all the usual options like the I/O address and IRQ.