Difference between revisions of "Mitsubishi MF357G"
From Vogons Wiki
Malvineous (Talk | contribs) (Add LS-120 media type) |
Malvineous (Talk | contribs) (Add photos) |
||
| Line 30: | Line 30: | ||
<gallery mode="packed"> | <gallery mode="packed"> | ||
| + | Image:Mitsubishi MF357G overhead.jpg|Overhead | ||
Image:Mitsubishi MF357G underside.jpg|Underside | Image:Mitsubishi MF357G underside.jpg|Underside | ||
</gallery> | </gallery> | ||
Revision as of 23:42, 25 March 2016
Mitsubishi MF357G
There is no image of this device — upload one!
| Bus type | IDE |
|---|---|
| Bus version | PIO-4 |
| Bus width | 16-bit |
| Bus speed | 8.33 MHz (16.66 MB/sec) |
| Manufacturer | Mitsubishi |
| Chipset | Unknown |
| Compatible with | DOS 720kB, DOS 1.44MB, 2.88MB?, LS-120 |
| Connectors | None |
| Requires -5VDC? | No |
| Requires -12VDC? | No |
| Floppy Drive | |
| Media type | 3.5 inch floppy disk Property "Has media type" has been marked for restricted use. |
| Sides | 2 |
| Tracks | 80 |
| Density | High |
| Floppy Drive | |
| Media type | LS-120 disk Property "Has media type" has been marked for restricted use. |
| Sides | 2 |
| Tracks | 6848 |
| Driver | N/A |
The Mitsubishi MF357G is an LS-120 drive capable of reading and writing 120MB disks, as well as standard 720kB and 1.44MB 3.5" floppy disks. It connects to the IDE bus and requires BIOS support for proper (3.5" floppy compatible) operation, however BIOS support became widespread from the late 1990s.
Additional photos
Overhead
Underside
