Difference between revisions of "3Com 3c509"
From Vogons Wiki
| (One intermediate revision by the same user not shown) | |||
| Line 5: | Line 5: | ||
| 8-bit ISA compatible = Yes | | 8-bit ISA compatible = Yes | ||
| Manufacturer = 3 Com Corporation | | Manufacturer = 3 Com Corporation | ||
| − | | Chipset = | + | | Chipset = 3Com 9513S |
| − | | Compatible with = [[Has compatibility:: | + | | Compatible with = [[Has compatibility::3C5X9]] |
| Connectors = [[Has connector::AUI]], [[Has connector::BNC]], [[Has connector::RJ45]] | | Connectors = [[Has connector::AUI]], [[Has connector::BNC]], [[Has connector::RJ45]] | ||
| Requires -5VDC = No | | Requires -5VDC = No | ||
| Line 21: | Line 21: | ||
}} | }} | ||
| − | The '''3 Com 3C509''' is a 10Mbps network card from 3 Coms popular Etherlink III series. There are versions with different connector types availiable, with the Combo variant shown here | + | The '''3 Com 3C509''' is a 10Mbps network card from 3 Coms popular Etherlink III series, it was introduced in 1994. There are versions with different connector types availiable, with the Combo variant shown here being the most versatile. |
| Line 32: | Line 32: | ||
== Boot ROM == | == Boot ROM == | ||
| − | This card's boot ROM socket will take a standard 28-pin ROM chip. | + | This card's boot ROM socket will take a standard 28-pin ROM chip. |
The card's DOS drivers come with a configuration program (<tt>3C50XCFG.EXE</tt>) that can be used to enable the ROM socket (it is disabled by default) and set the base address, as well as adjust all the usual options like base address and IRQ. | The card's DOS drivers come with a configuration program (<tt>3C50XCFG.EXE</tt>) that can be used to enable the ROM socket (it is disabled by default) and set the base address, as well as adjust all the usual options like base address and IRQ. | ||
| − | If used in an EISA board the card can be set to EISA mode by use | + | If used in an EISA board the card can be set to EISA mode by use of the utility and later configured by the ECU. |
== Resources == | == Resources == | ||
| − | * I/O address: | + | * I/O address: 0x280, 0x300, 0x310, 0x320, 0x330, 0x340, 0x350. |
| − | * IRQ: | + | * IRQ: 5, 7, 9, 10, 11, 12. |
| − | * Boot ROM size: 16kB, 32kB | + | * Boot ROM size: 8 kB, 16kB, 32kB, Disabled. |
| − | * Boot ROM: | + | * Boot ROM: 0xC0000 - 0xDE000. |
== References == | == References == | ||
<references/> | <references/> | ||
Latest revision as of 21:51, 15 March 2018
3Com 3c509
| Bus type | ISA |
|---|---|
| Bus width | 16-bit |
| Bus speed | 8 MHz |
| 8-bit ISA compatible? | Yes |
| Manufacturer | 3 Com Corporation |
| Chipset | 3Com 9513S |
| Compatible with | 3C5X9 |
| Connectors | AUI, BNC, RJ45 |
| Requires -5VDC? | No |
| Requires -12VDC? | No |
| Config method | Software |
| Ethernet | |
| Boot ROM | Socket, 28-pin JEDEC, read-only |
| Driver | Missing download URL |
The 3 Com 3C509 is a 10Mbps network card from 3 Coms popular Etherlink III series, it was introduced in 1994. There are versions with different connector types availiable, with the Combo variant shown here being the most versatile.
Additional photos
Underside
Boot ROM
This card's boot ROM socket will take a standard 28-pin ROM chip.
The card's DOS drivers come with a configuration program (3C50XCFG.EXE) that can be used to enable the ROM socket (it is disabled by default) and set the base address, as well as adjust all the usual options like base address and IRQ. If used in an EISA board the card can be set to EISA mode by use of the utility and later configured by the ECU.
Resources
- I/O address: 0x280, 0x300, 0x310, 0x320, 0x330, 0x340, 0x350.
- IRQ: 5, 7, 9, 10, 11, 12.
- Boot ROM size: 8 kB, 16kB, 32kB, Disabled.
- Boot ROM: 0xC0000 - 0xDE000.
