Difference between revisions of "Accton EN1650"
From Vogons Wiki
Malvineous (Talk | contribs) (Basic info) |
Malvineous (Talk | contribs) (Add driver URL) |
||
| Line 14: | Line 14: | ||
| Requires -12VDC = Unknown | | Requires -12VDC = Unknown | ||
| Config = [[Config method::Software]] | | Config = [[Config method::Software]] | ||
| − | | Driver | + | | Driver = [http://www.vogonsdrivers.com/getfile.php?fileid=901 Vogonsdrivers] |
}} | }} | ||
Revision as of 23:29, 5 February 2016
The Accton EN1650 is a 10Mbps network card.
Additional photos
Underside
Config utility
Diagnostics
Config options
Boot ROM
This card's boot ROM socket will take a standard 28-pin ROM chip. It has also been successfully tested with a 32-pin ROM chip using an adapter[1]. XTIDE will run without any problem.
The card's DOS drivers come with a configuration program (1STEP.EXE) that can be used to enable the ROM socket (it is disabled by default) and set the base address, as well as adjust all the usual options like base address and IRQ.
Resources
- I/O address: 240, 280, 2C0, 300, 320, 340, 360.
- IRQ: 2, 3, 4, 5, 10, 11, 12, 15, Disabled.
- Boot ROM size: 16kB only.
- Boot ROM: C000, C400, C800, CC00, D000, D400 and D800, Disabled.
