Difference between revisions of "Teac FD-55GFR"
Malvineous (Talk | contribs) (Add Tracks value) |
Malvineous (Talk | contribs) m (Disk size -> Media type) |
||
| Line 12: | Line 12: | ||
}} | }} | ||
{{Device Infobox/Floppy Drive | {{Device Infobox/Floppy Drive | ||
| − | | | + | | Media type = 5.25 inch floppy disk |
| Sides = 2 | | Sides = 2 | ||
| Tracks = 80 <!-- Nominal; actual max track unknown --> | | Tracks = 80 <!-- Nominal; actual max track unknown --> | ||
Latest revision as of 22:32, 25 March 2016
| Bus type | PC Floppy |
|---|---|
| Bus width | 1-bit |
| Bus speed | 500 kHz 0.5 MHz |
| Manufacturer | Teac |
| Chipset | IR4N171 |
| Compatible with | DOS 1.2MB, DOS 360kB, DOS 180kB |
| Connectors | None |
| Requires -5VDC? | No |
| Requires -12VDC? | No |
| Floppy Drive | |
| Media type | 5.25 inch floppy disk Property "Has media type" has been marked for restricted use. |
| Sides | 2 |
| Tracks | 80 |
| Density | High |
| Driver | N/A |
The Teac FD-55GFR is the most capable drive in the Teac FD-55 series, able to read disks written by all other models in the series, and write to many of them as well. It can read and write double-sided high-density 80-track (1.2MB) disks, as well as reading double-sided double-density 40-track (360kB) disks. It is also capable of reading the older single-sided double-density 40-track (160/180kB) format as well, used by the earliest versions of DOS.
Being an 80-track drive however, it still suffers from the same problems as any other when writing to 40-track (double-density) disks.
The GFR suffix indicates the drive combines functionality of the G (high-density) and F (double-density) models, with R referring to a refresh, where the design was refined to reduce manufacturing cost and power consumption.
Additional photos
Underside
