Difference between revisions of "Template:Device Infobox/PCMCIA Controller"
From Vogons Wiki
Malvineous (Talk | contribs) (Base off IDE Controller infobox) |
(No difference)
|
Latest revision as of 22:55, 1 January 2017
Device Infobox/PCMCIA Controller
There is no image of this device — upload one!
| Bus type | Unknown |
|---|---|
| Bus width | Unknown |
| Bus speed | Unknown |
| 8-bit ISA compatible? | Unknown |
| PCI 5V tolerant? | Unknown |
| PCI 3.3V tolerant? | |
| Manufacturer | Unknown |
| Chipset | Unknown |
| Connectors | Unknown |
| Requires -5VDC? | Unknown |
| Requires -12VDC? | Unknown |
| Config method | Unknown |
| PCMCIA Controller | |
| PCMCIA devices | Unknown |
| Supports Type I? | Unknown |
| Supports Type II? | Unknown |
| Supports Type III? | Unknown |
| Primary? | Unknown |
| Secondary? | Unknown |
| Tertiary? | Unknown |
| Quaternary? | Unknown |
| ROM type | Unknown |
| Driver | Missing download URL |
This template is used to populate the Device Infobox with information about a PCMCIA host adapter. See CardSoft PCMCIA Drive for example use. As this template sits inside an infobox, it can be combined with other templates in the case of multi-function devices.
Valid parameters and examples specific to this infobox are:
| Parameter | Meaning |
|---|---|
| PCMCIA devices = Value | Number of PCMCIA devices that can be connected via this host adapter (i.e. the number of card slots it has.)
|
| TypeI = Value | Boolean value indicating whether this adapter can be used with Type I PCMCIA devices. |
| TypeII = Value | Boolean value indicating whether this adapter can be used with Type II PCMCIA devices. |
| TypeIII = Value | Boolean value indicating whether this adapter can be used with Type III PCMCIA devices. |
| Primary = Value | Boolean value indicating whether this PCMCIA host adapter can be configured on the appropriate I/O ports to operate as the primary adapter in a system. |
| Secondary = Value | Boolean value indicating whether this PCMCIA host adapter can be configured on the appropriate I/O ports to operate as the second adapter in a system. |
| Tertiary = Value | Boolean value indicating whether this PCMCIA host adapter can be configured on the appropriate I/O ports to operate as the third adapter in a system. |
| Quaternary = Value | Boolean value indicating whether this PCMCIA host adapter can be configured on the appropriate I/O ports to operate as the fourth adapter in a system. |
| ROM type = Value | Text value for the type of ROM/EEPROM/Flash chip. One of:
Add others to this list as needed - try to be as generic as possible, avoiding part names and using interface names instead. |
Default values are shown if the parameter is omitted, so do not use any parameters unless the value is known (most of the defaults say "unknown").
