Template:Device Infobox/Motherboard
From Vogons Wiki
Device Infobox/Motherboard
There is no image of this device — upload one!
| Bus type | Unknown |
|---|---|
| Bus width | Unknown |
| Bus speed | Unknown |
| 8-bit ISA compatible? | Unknown |
| PCI 5V tolerant? | Unknown |
| PCI 3.3V tolerant? | |
| Manufacturer | Unknown |
| Chipset | Unknown |
| Connectors | Unknown |
| Requires -5VDC? | Unknown |
| Requires -12VDC? | Unknown |
| Config method | Unknown |
| Motherboard | |
| Form factor | Unknown |
| ISA slots | Unknown @ 8-bit Unknown @ 16-bit |
| PCI slots | Unknown @ 32-bit 33MHz Unknown @ 32-bit 66MHz Unknown @ 64-bit 33MHz Unknown @ 64-bit 66MHz Unknown @ 64-bit 133MHz |
| Boot ROM | Unknown type, write ability unknown |
| Driver | Missing download URL |
This template is used to populate the Device Infobox with information about a motherboard. See PC Chips M-209 for example use. As this template sits inside an infobox, it can be combined with other templates in the case of multi-function devices.
Valid parameters and examples specific to this infobox are:
| Parameter | Meaning |
|---|---|
| Form factor = Value | Property:Form factor |
| ISA slots/8-bit = 0 | Number of 8-bit ISA slots. Set to 0 or omit entirely if there are none. |
| ISA slots/16-bit = 0 | Number of 16-bit ISA slots. Set to 0 or omit entirely if there are none. |
| PCI slots/32-bit/33 = 0 | Number of 32-bit 33MHz PCI slots. Set to 0 or omit entirely if there are none. |
| PCI slots/32-bit/66 = 0 | Number of 32-bit 66MHz PCI slots. Set to 0 or omit entirely if there are none. |
| PCI slots/64-bit/33 = 0 | Number of 64-bit 33MHz PCI slots. Set to 0 or omit entirely if there are none. |
| PCI slots/64-bit/66 = 0 | Number of 64-bit 66MHz PCI slots. Set to 0 or omit entirely if there are none. |
| PCI slots/64-bit/133 = 0 | Number of 64-bit 133MHz PCI slots. Set to 0 or omit entirely if there are none. |
| Is ROM socketed = Value | Boolean value indicating whether there is a ROM socket or not. Yes if there is a socket for a boot ROM, or No if there is no boot ROM socket, or the boot ROM chip is soldered onto the PCB (typical for flash ROM chips). |
| ROM type = Value | Text value for the type of ROM/EEPROM/Flash chip. One of:
Add others to this list as needed - try to be as generic as possible, avoiding part names and using interface names instead. |
| Is ROM writable = Value | Boolean value indicating whether the ROM can be reflashed by the target system. Yes if the card can program the ROM itself, or No if the card has no ROM programming capability. |
Default values are shown if the parameter is omitted, so do not use any parameters unless the value is known (most of the defaults say "unknown").
