Intel CPUs

From Vogons Wiki
Revision as of 23:28, 19 February 2013 by Tetrium (Talk | contribs)

Jump to: navigation, search

Intel is probably the most well known CPU manufacturer in the world. They've been making CPU's all the way from the earliest 8086 and are still designing and manufacturing CPU's to this day.

Even though in modern days, Intel CPU's only fit in Intel sockets and the other way around, in the old days there was a wide variety of manufacturers for any given CPU socket.

Socket 4

Pentium 66


Socket 4 was released around 1993 and housed the very first real Pentium processor. Very few different CPU's have been made to fit this socket, which is limited to the Pentium 60MHz, the Pentium 66MHz and the obscure Pentium Overdrive which ran at either 120MHz or 133MHz. Because of the limited variety of CPU's manufactured for this socket and the limited speed options these motherboards provided, Socket 4 is a far less flexible platform when compared to Socket 3 or Socket 7. Socket 4 supported the then new 60MHz FSB and 66MHz FSB (even though some Socket 4 motherboards were made that had slower FSB's like 50MHz and 40MHz). Usually Socket 4 motherboards were fitted with ISA and PCI slots, though some VLB slotted Socket 4 motherboards were made. Socket 4 motherboards used either EDO or FPM memory modules and the memory modules had to be fitted in pairs where in it's predecessor, single modules were used. This was because Socket 4 was the first x86 motherboard that had a 64-bit memory bus (486 and earlier used a 32-bit, or a 16-bit memory bus).

All Socket 4 motherboards were made as AT motherboards or as proprietary boards. No ATX Socket 4 motherboards were ever made. No AGP slotted Socket 4 motherboard was ever made.

Socket 7

Pentium 166 MMX










Socket 370

Pentium 3 1400MHz

Socket 370 was released on the 4th of January 1999 and was originally made as a budget CPU socket compared to Intel's higher-end Slot 1 solution. Later it became Intel's main CPU Socket until the release of the Pentium 4, after which it moved to the budget end of the market again before being phased out altogether. A wide variety of CPU's exist for this socket, ranging from the 333MHz Celeron (with Mendocino core) all the way to the Pentium 3s 1400MHz (also known as Tualatin-s). VIA also made a variety of CPU's for this socket, though compatibility is somewhat sketchy. As this CPU socket went through a couple revisions, not all Socket 370 CPU's will work in any given Socket 370 motherboard, even though they will mechanically fit. Generally speaking there are 3 different types of motherboards using this socket:The early Celeron Mendocino-only motherboards (usually limited to a 66MHz FSB), the Coppermine capable motherboards (having a maximum FSB of either 100MHz or 133MHz) and the Tualatin capable motherboards. Sometimes Tualatin capable motherboards have their CPU socket colored blue instead of the usual white.

To prevent usage of newer CPU's in older motherboards, Intel switched a couple pins around to prevent operation of Coppermine CPU's in the earliest Celeron-only boards and Intel repeated that trick when it started manufacturing Tualatin CPU's. This prevented the use of later chips in older motherboards, even if the right (lower) voltage could be supplied by the motherboard.

Usually Socket 370 boards had AGP (the older ones AGP 2x and the newer ones AGP 4x). All of them had PCI slots and the older types of Socket 370 motherboards had ISA slots. Almost all Socket 370 motherboards are ATX (though a few AT Socket 370 motherboards are known to exist). Only very few Tualatin motherboards featured one or 2 ISA slots. Usually the Intel 815 chipsetted motherboards had no ISA slots, except when the motherboard was equipped with a bridge chip. The bridge chip 'could' cause some problems when using ISA sound cards.