Search results

Jump to: navigation, search
  • ...SA Xcelerator - PIIX that included the functionality of several common I/O interfaces, including a PCI to ISA bridge and an integrated Dual Channel IDE controlle
    12 KB (2,001 words) - 05:26, 5 April 2013
  • I/O ports are configured by jumpers. DMA, IRQ, SB emulation and some other sett ...It has compatibility problems with some DOS games because of the use of I/O addresses not used by S-2000 (games don't always support them). Again there
    7 KB (1,104 words) - 07:38, 12 March 2013
  • ...e effects are unavailable. The EWS64 also has two independent MPU-401 MIDI interfaces (UART only). MIDI-1 is always connected to the SAM9407 chip, while MIDI-2 i ...card. After changing resource settings the computer has to be cold booted (i.e. by pressing Reset).
    12 KB (2,073 words) - 20:52, 26 May 2016
  • ...es. There are several revisions of the card which have different physical interfaces at the back. Revisions include: RJ45 + dsub15, BNC + dsub15, and possibly Image:Intel_lan_8_16.jpg|Revision with RJ45 + dsub15 interfaces
    2 KB (316 words) - 06:04, 23 April 2018
  • ...interface. While a large number of pins and signals were dropped, the two interfaces are largely compatible and all that is needed to convert between the two is [[Category:I/O interfaces]]
    1 KB (164 words) - 18:29, 18 March 2016
  • ...he card is configured as a secondary IDE controller, the second group of I/O addresses is truncated. Normally the second IDE controller also uses ports
    3 KB (379 words) - 12:04, 26 February 2017
  • : Indicates the port and IRQ of the IDE interface. <tt>xxx</tt> is the I/O address in hex, and <tt>yy</tt> is the IRQ in decimal. The default values : Note that the IRQs for the tertiary and quaternary interfaces are not standardised, so they will need to be specified manually if they do
    2 KB (294 words) - 11:59, 26 February 2017
  • It allows native 8088 operation while supporting newer interfaces such as ATX, VGA & CF Card ...rd VGA is now an optional PC/104 card. The VGA port still remains in the I/O area.
    2 KB (345 words) - 20:50, 5 February 2020
\n