Template:Device Infobox/CPU

Device Infobox/CPU

There is no image of this device — upload one!

Bus type	Unknown
Bus width	Unknown
Bus speed	Unknown
8-bit ISA compatible?	Unknown
PCI 5V tolerant?	Unknown
PCI 3.3V tolerant?
Manufacturer	Unknown
Chipset	Unknown
Connectors	Unknown
Requires -5VDC?	Unknown
Requires -12VDC?	Unknown
Config method	Unknown
CPU
Socket	Unknown
Clock speed	Unknown
Architecture	Unknown, Unknown
Endian
Register size	Unknown
Addressable memory	Unknown
Driver	Missing download URL

This template is used to populate the Device Infobox with information about a CPU or processor. See Intel Celeron 300A for example use. As this template sits inside an infobox, it can be combined with other templates in the case of multi-function devices.

Valid parameters and examples specific to this infobox are:

Parameter	Meaning
Socket = Value	Page name for the type of CPU socket. One of: PLCC68 - 68-pin PLCC, 286 PGA132 - 386 Socket 3 - 486 and POD Socket 5 - early Pentium Socket 7 - later Pentium MMX / AMD K5 and K6 / Cyrix 6x86 Socket 8 - Pentium Pro Slot 1 - early Pentium II/III Slot 2 - Pentium II/III Xeon Socket 370 - later Pentium II/III Slot A - early AMD K7 Socket 462 - later AMD K7 Socket 423 - early Pentium 4 Socket 478 - later Pentium 4 Add others to this list as needed - try to be as generic as possible, avoiding part names and using interface names instead.
Clock speed = 300 MHz	Nominal processor speed. Provide a value with a suffix, such as 100 MHz, 2.4 GHz, etc.
Arch family = Value	Page name for the general CPU architecture. One of: x86 - Intel x86 ARM MIPS 68k - Motorola 68000 Add others to this list as needed - try to be as generic as possible, avoiding part names and using interface names instead.
Arch ver = Value	Page name for the CPU architecture version. The value depends on the architecture family. One of: x86 i8086 i286 i386 i486 P5 P6 Netburst Core K6 K7 K8 ARM v2 v3 v4 v5 v6 v7 v8 MIPS I II III IV V 68k 68010 68020 68030 68040 68060 Add others to this list as needed - try to be as generic as possible, avoiding part names and using interface names instead.
Endian/Big = Y	Set to Y if CPU can run in big-endian (Motorola) mode, N if not.
Endian/Little = Y	Set to Y if CPU can run in little-endian (Intel) mode, N if not.
Reg size = 16 bit	Size of the processor's general registers. Provide a value with a suffix, such as 16 bit, 32 bit, etc.
Addr size = 32 bit	Size of the processor's address bus (as opposed to the data bus.) Provide a value with a suffix, such as 16 bit, 32 bit, etc.

Default values are shown if the parameter is omitted, so do not use any parameters unless the value is known (most of the defaults say "unknown").