Difference between revisions of "Template:Device Infobox/IDE Controller"
From Vogons Wiki
Malvineous (Talk | contribs) (Add fields) |
Malvineous (Talk | contribs) m (IDE -> IDE controller) |
||
| Line 4: | Line 4: | ||
}} | }} | ||
</noinclude> | </noinclude> | ||
| − | {{Device Infobox/Type | IDE | IDE Controller}} | + | {{Device Infobox/Type | IDE controller | IDE Controller}} |
<includeonly>{{#ifeq:{{{IsInfoboxPage|N}}} | N | [[Category:IDE controllers]] }}</includeonly> | <includeonly>{{#ifeq:{{{IsInfoboxPage|N}}} | N | [[Category:IDE controllers]] }}</includeonly> | ||
{{Device Infobox/Item | IDE buses | [[Number of IDE buses::{{{IDE buses|Unknown}}}]] }} | {{Device Infobox/Item | IDE buses | [[Number of IDE buses::{{{IDE buses|Unknown}}}]] }} | ||
Latest revision as of 16:45, 13 February 2016
Device Infobox/IDE Controller
There is no image of this device — upload one!
| Bus type | Unknown |
|---|---|
| Bus width | Unknown |
| Bus speed | Unknown |
| 8-bit ISA compatible? | Unknown |
| PCI 5V tolerant? | Unknown |
| PCI 3.3V tolerant? | |
| Manufacturer | Unknown |
| Chipset | Unknown |
| Connectors | Unknown |
| Requires -5VDC? | Unknown |
| Requires -12VDC? | Unknown |
| Config method | Unknown |
| IDE Controller | |
| IDE buses | Unknown |
| Primary? | Unknown |
| Secondary? | Unknown |
| Tertiary? | Unknown |
| Quaternary? | Unknown |
| ROM type | |
| Driver | Missing download URL |
This template is used to populate the Device Infobox with information about an IDE controller card. See AB-862G Super I∕O Card for example use. As this template sits inside an infobox, it can be combined with other templates in the case of multi-function devices.
Valid parameters and examples specific to this infobox are:
| Parameter | Meaning |
|---|---|
| IDE buses = Value | Number of IDE buses that are available on the device. Each bus typically supports the connection of up to two drives.
|
| Primary = Value | Boolean value indicating whether an IDE interface can be set as the first, or primary, IDE bus in the system. Typically this is at I/O address 0x1F0 and uses IRQ 14. |
| Secondary = Value | Boolean value indicating whether an IDE interface can be set as the second, or secondary, IDE bus in the system. Typically this is at I/O address 0x170 and uses IRQ 15. |
| Tertiary = Value | Boolean value indicating whether an IDE interface can be set as the third, or tertiary, IDE bus in the system. Often this is at I/O address 0x1E8 and uses IRQ 11 or 12. |
| Quaternary = Value | Boolean value indicating whether an IDE interface can be set as the fourth, or quaternary, IDE bus in the system. Oten this is at I/O address 0x168 and uses IRQ 10 or 11. |
| ROM type = Value | Text value for the type of ROM/EEPROM/Flash chip. One of:
Add others to this list as needed - try to be as generic as possible, avoiding part names and using interface names instead. |
Default values are shown if the parameter is omitted, so do not use any parameters unless the value is known (most of the defaults say "unknown").
