Difference between revisions of "Template:Device Infobox/CPU"
Malvineous (Talk | contribs) (Create infobox) |
(No difference)
|
Latest revision as of 20:34, 23 April 2016
Bus type | Unknown |
---|---|
Bus width | Unknown |
Bus speed | Unknown |
8-bit ISA compatible? | Unknown |
PCI 5V tolerant? | Unknown |
PCI 3.3V tolerant? | |
Manufacturer | Unknown |
Chipset | Unknown |
Connectors | Unknown |
Requires -5VDC? | Unknown |
Requires -12VDC? | Unknown |
Config method | Unknown |
CPU | |
Socket | Unknown |
Clock speed | Unknown |
Architecture | Unknown, Unknown |
Endian | |
Register size | Unknown |
Addressable memory | Unknown |
Driver | Missing download URL |
This template is used to populate the Device Infobox with information about a CPU or processor. See Intel Celeron 300A for example use. As this template sits inside an infobox, it can be combined with other templates in the case of multi-function devices.
Valid parameters and examples specific to this infobox are:
Parameter | Meaning |
---|---|
Socket = Value | Page name for the type of CPU socket. One of:
Add others to this list as needed - try to be as generic as possible, avoiding part names and using interface names instead. |
Clock speed = 300 MHz | Nominal processor speed. Provide a value with a suffix, such as 100 MHz, 2.4 GHz, etc. |
Arch family = Value | Page name for the general CPU architecture. One of:
Add others to this list as needed - try to be as generic as possible, avoiding part names and using interface names instead. |
Arch ver = Value | Page name for the CPU architecture version. The value depends on the architecture family. One of:
Add others to this list as needed - try to be as generic as possible, avoiding part names and using interface names instead. |
Endian/Big = Y | Set to Y if CPU can run in big-endian (Motorola) mode, N if not. |
Endian/Little = Y | Set to Y if CPU can run in little-endian (Intel) mode, N if not. |
Reg size = 16 bit | Size of the processor's general registers. Provide a value with a suffix, such as 16 bit, 32 bit, etc. |
Addr size = 32 bit | Size of the processor's address bus (as opposed to the data bus.) Provide a value with a suffix, such as 16 bit, 32 bit, etc. |
Default values are shown if the parameter is omitted, so do not use any parameters unless the value is known (most of the defaults say "unknown").